So habe mich jetzt mit Winavr beschäftigt,das Makefile geladen,geändert auf USBASP brenner und im Ausgabefenster erhalte ich :
> "make.exe" program
avrdude -p attiny2313 -P lpt1 -c usbasp -U flash:w:main.hex
avrdude: error: could not find USB device "USBasp" with vid=0x16c0 pid=0x5dc
make.exe: *** [program] Error 1
> Process Exit Code: 2
> Time Taken: 00:00
Testboard kein Jumper gesetzt
USBASP J2 gesetzt
Was bedeutet das lpt1 in der blau unterlegten Zeile??
Dieses AVRDUDE ist doch der letzte shice !
Was soll ich jetzt noch machen??
Hab das nochmal consolenmässig probiert
Usage: avrdude.exe [options]
Options:
-p <partno> Required. Specify AVR device.
-b <baudrate> Override RS-232 baud rate.
-B <bitclock> Specify JTAG/STK500v2 bit clock period (us).
-C <config-file> Specify location of configuration file.
-c <programmer> Specify programmer type.
-D Disable auto erase for flash memory
-i <delay> ISP Clock Delay [in microseconds]
-P <port> Specify connection port.
-F Override invalid signature check.
-e Perform a chip erase.
-O Perform RC oscillator calibration (see AVR053).
-U <memtype>:r|w|v:<filename>[:format]
Memory operation specification.
Multiple -U options are allowed, each request
is performed in the order specified.
-n Do not write anything to the device.
-V Do not verify.
-u Disable safemode, default when running from a scrip
t.
-s Silent safemode operation, will not ask you if
fuses should be changed back.
-t Enter terminal mode.
-E <exitspec>[,<exitspec>] List programmer exit specifications.
-x <extended_param> Pass <extended_param> to programmer.
-y Count # erase cycles in EEPROM.
-Y <number> Initialize erase cycle # in EEPROM.
-v Verbose output. -v -v for more.
-q Quell progress output. -q -q for less.
-? Display this usage.
avrdude version 5.10, URL: <
http://savannah.nongnu.org/projects/avrdude/>
D:\Dokumente und Einstellungen\Nico>l:\WinAVR\bin\avrdude.exe -p t2313 -c usbasp
-P USB: -e -U flash c:\13.hex
avrdude.exe: error: could not find USB device "USBasp" with vid=0x16c0 pid=0x5dc
D:\Dokumente und Einstellungen\Nicola>
LG